Under Cabinet Range Hood – Slim Under-Cabinet Range Hood for Compact Kitchens

An under cabinet range hood fits the gap between the hob and the wall cupboards above it — a space usually too shallow for anything with a chimney. This one is built slim: a 600 × 400 mm brushed stainless body that keeps the headroom over the cooking area usable instead of turning it into something you duck under.

AurumDine builds it in five duct sizes for distributors, appliance retailers and private-label programmes, with the grease filter and oil cup already fitted.

Built for the Space Nobody Measures

Compact kitchens are where hoods get chosen badly. The gap between hob and cupboard is small, the extractor run already exists in the wall, and the household does not want electronics that can fail. This hood answers all three. Five duct sizes — 6, 7, 8, 10 and 12 inch — match the ducting already in the building, so a renovation does not have to open the wall again.

Recommended installation height is within 50 cm above the cookware, and the slim body makes that easy to hold without losing cupboard space.

What the Naming Variations Mean

Listings for this category vary more than most. Under cabinet range hood and under-cabinet range hood are the same product hyphenated two ways; undercabinet range hood runs the words together; under cabinet hood drops the middle word; and under-cabinet range hoods is simply the plural in retail listings. Kitchen under cabinet range hood and in cabinet range hood describe where the unit goes, while range hood under cabinet is the same phrase written backwards.

One term is worth watching when you specify: in cabinet range hood sometimes means a unit fully enclosed inside a cupboard, which is a different installation with different clearance requirements. If that distinction matters in your market, confirm it before you order.

Mechanical Controls, and Why That Sells

The controls are a two-speed mechanical switch rather than a touch panel. That is a deliberate trade: fewer parts to fail, no control board to replace, and an operator who can work it without reading a manual. In rental and serviced property — the segment that buys most of these — that is worth more than a digital display.

The same logic runs through service: motors and switches are standard parts held in stock, so a replacement is a swap, not a diagnosis.

Matching the Duct That Is Already in the Wall

Because the fan and the duct scale together, the model you choose is decided by the ducting already in the building. The range runs from 6 in (150 mm duct, 34 W) to 12 in (300 mm duct, 350 × 350 mm fan, 120 W), and power draw tracks the fan size at 2800 r/min.

That is what the under cabinet range hood exhaust figure on a specification sheet is telling you: the outlet diameter the unit needs. Match it to the wall and the install is a straight swap; miss it and the job needs an adapter at best. Mixed duct sizes ship in one container, so a distributor can stock a size ladder from a single order rather than guessing what a market installs.

Where Under Cabinet Hoods Sell Best

• Small apartment kitchens

• Rental and let property

• Serviced apartments

• Studio flats with compact kitchens

• Kitchen renovation projects

• Light commercial kitchens

Under cabinet hoods of this type sell best into rental and serviced property, where the buyer is replacing rather than designing. A mechanical hood with a stock duct size is a one-visit job for a fitter — the argument that closes the sale.

Model, Minimum Order Quantity and OEM Options

One body size, five duct and fan sizes. The MOQ is low enough for a first trial order, and mixed duct sizes can ship in one container — useful if you are still learning which size your market installs.

Duct size, voltage and branding are open to customization. Voltage differs by market, so confirm the destination and the unit is built to that specification. The full range also covers 7 in (180 mm, 45 W) and 10 in (250 mm, 100 W).

Certification, Warranty and Lead Time

Units are built to CE and RoHS requirements, with third-party test reports arranged for your destination market. Every unit carries a 1-year warranty, with motors and switches held in stock. Stock lead time is 7–15 days; bulk or customized runs take 20–30 days after deposit. Where the buyer has a full wall run and wants the extra airflow, the same range includes a wall mount range hood at 900 CFM.

Which duct size should we order?

Start from the duct already in the wall, not from the airflow number. Measure the existing outlet, then pick the matching model — 6, 7, 8, 10 or 12 inch. If there is no existing duct, an 8 in model is the usual middle ground for a domestic kitchen, and sizes can be mixed in one container if you want to test two.

Is a slim hood strong enough for real cooking?

For a domestic hob, yes. The slim body reduces headroom, not fan capacity — a 12 in model moves air through a 350 × 350 mm fan at 2800 r/min, and the 6 in model draws only 34 W. The real limit is the duct in the wall: a hood cannot outperform the run it is connected to.

Can we order a sample unit before a bulk order?

Yes. The MOQ is low enough for a first trial order, so a sample can be mounted and tested before you commit to a container. Samples are available before any bulk order, and custom branding or packaging runs are quoted against your destination market.

Request a Sample or a Quotation

Send your destination market, the duct size you need to match, voltage and packaging requirements, and we will return a quotation covering model, MOQ, sample time and lead time, usually within one business day. AurumDine supplies under cabinet range hoods and other kitchen appliances to distributors, appliance retailers and private-label programmes in North America, Europe and Australia.