Kitchen Range Hood Sourcing: What Importers Check Before Ordering

A kitchen range hood is the one appliance in a fitted kitchen that buyers notice only when it fails. Importers and distributors usually decide on three numbers: airflow, duct diameter and noise. This wall mount model moves 900 CFM through a 6 in outlet and fits a 29.5 in body. Those three facts decide which markets a retailer can sell it into.

AurumDine builds this kitchen range hood in a 30 inch ducted format. We supply it to importers, kitchen retailers and project buyers.

Why Kitchen Ventilation Numbers Come First

Buyers compare airflow in CFM before they compare anything else. Kitchen ventilation figures also feed local building rules, so the number travels with the unit. A hood has to move enough air to clear smoke without pulling the flame from a burner. The Home Ventilating Institute publishes the rating method behind those numbers. Its guide shows how a laboratory reaches a certified figure. Browse the range hood range for the other models we build.

The factory rates this model at 900 CFM. Therefore it suits a gas hob with four or five burners. Meanwhile the noise figure reaches 65 dB at the top speed. In short, read airflow and noise together, never separately.

A Kitchen Range Hood Is Judged by Its Fan and Filter

The range hood fan here is a centrifugal type, and the range hood filter set is permanent stainless steel. Both choices matter to an importer. A permanent range hood filter needs no replacement, so it removes a consumable from the support burden. What is more, a dishwasher handles the filter, which is the first question a retail buyer asks.

A range hood fan that matches the duct keeps noise down and protects the motor. Because of that, the spares list stays short: motors, filters, light boards and control boards. A distributor who holds those four parts can cover most warranty claims without ordering a container.

Ducting and the Range Hood Vent

A hood cannot outperform the run it is connected to. Range hood duct size is the first thing a fitter checks. Get the range hood duct size wrong and the customer blames the airflow. This unit has a 6 in / 15.2 cm outlet, which matches the common residential duct in North America.

So plan the range hood vent before you quote a price. In practice, a short straight run keeps performance close to the rated figure. A mismatched range hood vent, meanwhile, causes most returns that are not manufacturing faults.

Fitting a Wall Mount Range Hood Over a Cooker

Some buyers ask for a wall mount range hood because they sell a fitted kitchen as one package. The layout has to line up with the cooker below. Here the hood width is 29.5 in / 75 cm, and the front apron is 3.9 in / 9.9 cm tall.

For example, a 30 in cooker under the same width keeps the visual line tidy. As a result, package deals close faster when both widths sit on the same page. For a cabinet-mounted alternative, compare the under cabinet range hood.

Stainless Steel Range Hood Finish and Controls

The body is a stainless steel range hood shell with a black glass front panel. Controls are a touch panel with a display, plus gesture sensing and voice control. A long press dims the LED light.

A stainless steel range hood also hides fingerprints better than a polished finish, and the panel wipes clean without a specialist product. In addition, a display helps a showroom demo, which matters for retail chains that sell from a floor.

Model, Minimum Order Quantity and OEM Terms

One stock model, one build. Stock orders start at 1 unit, so a distributor can test airflow and noise before committing to volume. Custom panel, logo or packaging runs start at 50 to 100 units.

• Model: 30 in / 76 cm wall mount, 900 CFM, ducted.

• Duct outlet: 6 in / 15.2 cm.

• Overall size: 29.5 x 18.3 x 17.12 in / 75 x 46.5 x 43.5 cm.

• Filter: permanent stainless steel baffle.

• MOQ: 1 unit for stock; 50-100 units for custom panel, logo or packaging.

• Lead time: 7-15 days for stock; 20-30 days for bulk or custom orders.

• Spares: we hold motors, baffle filters, light boards and control boards in stock.

• Warranty: 1 year.

Production follows CE and RoHS requirements, and we arrange third-party safety and EMC reports for your market.

Frequently Asked Questions

What airflow do I need for a five burner gas hob?

A four or five burner hob usually needs a hood rated above 600 CFM. This unit carries 900 CFM, which leaves headroom for a wok burner. Check the range hood vent first, because a long run lowers the effective figure.

Do the filters go in a dishwasher?

Yes. The baffle range hood filter lifts out and needs no dismantling. That is why we list it as a permanent part rather than a consumable, and why the spares kit stays small.

Can you print our brand on the panel?

Yes. Custom panel, logo and packaging runs start at 50 to 100 units, quoted per artwork. Send the artwork and the destination market, and we quote marking and packaging together.

Final Thoughts

A kitchen range hood sells on airflow, duct size and noise, and it keeps selling when the filter and the spares stay simple. The measured figures above come from the factory spec sheet, and the rating method comes from HVI.

Review the 900 CFM wall mount range hood for the full specification. Then ask for a sample unit before you commit to volume.