Range Hood Noise: What a Decibel Rating Really Hides
News Details
Two hoods both list 65 dB. One is easy to live with, and the other drives the cook out of the room. The figures match, so the difference sits elsewhere: the speed behind the test, the distance to the microphone and the duct on site. Range hood noise is a system result, not a single number.
AurumDine builds ducted, recirculating and slim hoods for importers and appliance distributors. Our 900 CFM wall mount tops out at 65 dB, and we quote that figure with the test method attached.
Key takeaways
- A decibel figure means little without the speed and distance behind it.
- The duct, not the motor, causes most noise in a real kitchen.
- Working-speed noise sells a hood; top-speed noise only wins a sheet.
- Ask for the reading at the speed a household actually uses.
Why a Range Hood Noise Figure Misleads
The decibel scale is logarithmic. A rise of 10 dB reads as roughly twice as loud, and a rise of 3 dB doubles the sound power. Therefore a 70 dB hood does not sound 5% louder than a 65 dB one. It sounds about twice as loud.
Distance changes the reading too. A test at one metre gives a lower figure than a test at the cook's ear. However, some brands quote at three metres, where the number drops again. Two sheets measured at different distances cannot be compared.
Speed does the rest. Most hoods publish the top setting, because it carries the biggest airflow number. In practice, a household rarely runs at top speed for a whole meal. Range hood noise at the working speed decides whether a kitchen feels calm.
Decibel and Sone: Two Scales
A range hood decibel rating is the common unit in Europe and Asia. It measures sound pressure on a logarithmic scale across the full frequency range. A second range hood decibel figure often appears in the same brochure, taken at another distance, so read the note.
A sone rating is common in North America. It measures perceived loudness on a linear scale. One sone sits near 40 dB at 1 kHz, and two sones sound twice as loud as one. That linear behaviour makes a sone rating easier for a shopper to read.
The two scales do not convert with one multiplier, because frequency content shifts the result. Therefore a buyer who compares a sone rating with a decibel figure should convert both through one test house.
Either way, the hood noise level depends on where the measurement happens. A test in an empty room reads lower than a test in a fitted kitchen, with cabinets around the unit.
What Raises the Reading
Four things push a hood above its catalogue figure.
- Duct diameter. A 4 inch duct through the same fan moves less air and adds back pressure. The fan speeds up, and noise climbs. A 6 inch duct diameter is the usual fix.
- Bend count. Every elbow costs pressure. For example, two bends behind a cabinet can add more noise than a step up in fan speed.
- Filter condition. A clogged baffle filter starves the fan. The motor works harder, and the sound rises while extraction falls. A clean baffle filter restores the figure.
- Cabinet cavity. A hood fitted into a tight box resonates. The same unit in an open wall reads quieter.
Kitchen ventilation design therefore starts before the hood. The duct route and the outlet size belong in the kitchen drawing, not in the appliance order. In addition, a planned route avoids the elbow that ruins a quiet unit. As a result, the installed hood keeps the figure from the sheet.
Noise at the Working Speed
A range hood cfm figure and a noise figure should travel together. A 900 CFM unit that reads 65 dB at top speed reads lower at the middle speed, where most cooking happens. That is why we publish both.
Our wall mount hood runs 900 CFM through a 6 inch outlet, and the 65 dB figure belongs to the highest setting. A buyer who specifies the middle setting gets a quieter kitchen and enough extraction for a gas hob. Meanwhile, the range hood cfm figure at that setting still clears a five-burner hob.
The portable model takes another route. It recirculates through a replaceable filter and runs from USB, so no duct adds back pressure. A low-noise motor keeps conversation normal at the table. At the same time, the hood noise level stays low because the unit sits away from the ear.
A slim under-cabinet hood sits closest to the ear, so mounting height matters. A unit fitted at the low end of its range reads louder than the same unit at the top of the range. Range hood noise on that model therefore depends on the gap above the hob.
What to Specify
Five lines keep a hood order honest.
- Noise: the dB figure, the speed it belongs to and the distance.
- Airflow: the CFM or m3/h figure at that same speed.
- Duct: outlet size, bend count and the kitchen ventilation route.
- Filter: baffle, mesh or a replaceable screen.
- Test method: the standard behind the number.
Range hood noise belongs on the order next to airflow, because the two figures describe one working point. AurumDine quotes the noise figure per model and confirms the method before the order. Stock units ship from one unit, and a custom panel or logo run starts at 50 to 100 units. A one-year warranty covers the motor and the control board.
Frequently Asked Questions
Is 65 dB loud for a range hood?
It sits in the normal band at top speed. A conversation at one metre stays possible, and the middle speed drops well below it. Below 60 dB at top speed counts as quiet for a ducted unit.
Do sones and decibels measure the same thing?
They describe the same sound in different ways. A decibel figure is logarithmic sound pressure, and a sone rating is linear loudness. Convert through one test house, not a formula.
Why does my hood sound louder than the showroom unit?
The duct is the usual cause. A narrow run, extra bends or a clogged filter adds back pressure, and fan noise climbs with it.
Does a bigger duct make a hood quieter?
It usually does, because the fan meets less resistance. A 6 inch duct on a 900 CFM unit runs quieter than a 4 inch run.
Can a recirculating hood be quiet?
It can, because no duct adds back pressure. The filter still needs cleaning, and a clogged filter raises noise on any hood.
Final Thoughts
A range hood noise figure is a claim with conditions attached. Read the speed, the distance and the duct behind it. Then write the working-speed number into the order, not the top-speed headline.
Review the 900 CFM wall mount hood for the full noise and airflow figures. Check the portable recirculating model for ductless kitchens. Browse the range hood range. The sizing logic sits in the hood buying guide.